Don`t hesitate to contact us for any further information you will need.
ROTARY VACUUM FILTER YF
Single-chamber type Continuous Rotary Vacuum Filter
YF Filter is a cylindrical single-chamber type filtration unit. Compared with conventional multi-chamber filters, it offers superior filtering and cake-washing capabilities and finds a wide range of uses with the following outstanding features.
BETWEEN BEARINGS PUMP BTBF & BTBFD
Radially Split, Multistage, Double Casing Between Bearings Pump (API Class BB5)
Sometimes called “barrel pumps” due to the cylindrical shape of their outer casing, BB5 pumps are high-pressure pumps with three or more impellers. As injection pumps they pump pressurized fluid into the reservoir rock to pressurize the oil and extract it. As charge pumps in oil refineries they put fluids under high pressure to transfer them to various reaction columns. To create this high pressure, BB5 pumps have impellers in multiple stages, and specifications may call for high-speed rotation in the range of 4,000 – 7,000 rpm. Literally the pumping “hearts” in oil-extraction and refining operations, they are the most important pumps in these plants. Advanced technology allows them to operate continuously at extreme temperatures and pressures without leaking. The SNM Model BTBF pump offers just such reliable, continuous operation under extremely harsh conditions.
SIDE ENTERING TANK MIXER
The Side Entering Mixer is attached to the outer bottom of a large petroleum storage tank to prevent the sedimentation of solids contained in heavy oil and crude oil on the tank bottom. The connection between mixer and tank is completely sealed to prevent oil leakage. This mixer is widely used in the petroleum and power generation industries.
The Peeler Centrifuge, being of horizontal construction, has various features including evenly distributed cake deposition with smooth liquid feed and fast raking. The Siphon Peeler Centrifuge is a siphon-equipped horizontal centrifugal filter with superior treatment and cleaning capabilities. These features have promoted the widespread use of the Siphon Peeler Centrifuge at many chemical and food processing plants.
Several of Maker's basic concepts and philosophies such as two bearing, single-shaft construction, cold-end power drive, and axial exhaust were established over a long period. These fundamental and time-proven concepts used by maker for over 25 years have now become the industry standards.
TWIN SCREW EXTRUDER (i-TEX-SERIES)
“i-TEX” series Twin Screw Extruder follows design concept of TEX alfa-2 series, high speed and ultra high torque.
“i-TEX”provides world highest quality with “Integrated, Intelligent, Innovative” technology.
CUSTOM TAILORED SPRAY DRY SYSTEMS
Laboratory use, medium-scale production and large industrial open and closed spray dryers, open and closed spray coolers, fluidized bed systems, exhaust gas coolers and treatment equipment, modifications of all maker's basic model series on customer request.
GENERATOR FOR INDUSTRIAL USE
Quiet and Good to the environment: Special techniques and optimum use of sound isolation materials in this type of Generators adds up to extra-low noise that is ideal for use it in urban and residential areas. Compact, Powerful and Long-lasting: The 3-phases and 4-wires Generator was tried and tested in many harsh working environments across Asia and the Middle East, brought substantially bigger generation capacity for the same package size. The sound proofed bonnet is light weight and takes up very little space
To satisfy above requirement, maker has been researched and developed of the compressor with high efficiency, and up to now, many compressors have been supplied and are operating successfully in the world.
Japan Machinery Company
Overseas Operations Division
Nakajima Shoji Building, 7th Floor 5-6, 8 Ginza
Chuo, Tokyo C.P.: 104-0061, Japan
Tel: (81)-3-3573-5424 Fax: (81)-3-3573-5445