Rope Layer 200/4 SIMA
This new machine developed by SIMA Group represents an important novelty in the field of rope layers, because 200/4 is suitable to produce small diameters, from 2 to 6mm, without investing high capitals, therefore with the max economical conveniennce.
The 200/4 is made of a feeding section, running with 3 or 4 strands, and of a take-up section, which is the GS2000, a more than tested machine. The system conceived in this way leaves complete freedom to the customer concerning its use, because it is evident it can be used as a rope layer or, using the only take-up section, as a twister.
The 200/4 runs on the principle of the 2 twists in the feeding section and 2 twists in the take-up section; mechanically speaking, cynematism where introduced, which have been considerably simplified, with benefits to the noise level, which is within what foreseen by the international regulations, thanks also to the insulation.
- Set-up of 200/4 through the control panel of GS2000
- Electronic change of the pre-twist ratio
- Device to detect the strand breakage
- Immediate change of the rotation direction S or Z
- New cynematism with consequent noise reduction
- Feeding up to 4 bobbins of 12" x 12", for a total of 160000 den
We wish here by to point out that in its range of rope layers SIMA Group has another machine, with the same diameter, the 300/3 and 300/4, which is not replaced, but comes alongside. In fact, the 200/4 for ropes of Ø= 3mm produces 16 Kg/h while the 300 produces 29 Kg/h, t is therefore clear that the 300 is extremely valid and unreplaceable for the large productions.
|Rope diameter (in outlet)||mm||2 ÷ 6|
|Twist Range||Twists/meter||20 ÷ 125|
|Twist direction||-||S or Z|
|N° of spools in feeding||-||4|
|Spool in feeding section||inches||12" x 12"|
|Weight of the PP full spool||kg||10,6|
|Machine dimension: feed + take-up||mm||5103x1600x1930|
|Take-up in bobbins||inches||6"-8"-10"-12"|
EXP Model PM-75-EXP Pilot Monitors for Hazardous Area Classification
Multi Wavelength Fiber Optic Pyrometers
Silver Series U Class Infrared Pyrometers
Saniflo HS Pump
PX4 - 38 mm (1 1/2
T15 - 76 mm (3'')
T4 - 38 mm
PX4 - 38 mm (1 1/2